Comments on: cbr 1000 motorcycle trouble starting please help?

By: vijay v

vijay v — Thu, 05 Mar 2009 07:03:54 +0000

you see it is possible to solve it. if NO than you go to the motorcycle garage or showroomes

By: vf29_sandman

vf29_sandman — Mon, 02 Mar 2009 17:16:39 +0000

make sure both battery connections are clean and tight, the battery fully charged. if both of these are good, have the battery load tested. another thing would be the voltage regulator gettin squirelly and might need replaced.

By: boogie2510

boogie2510 — Mon, 02 Mar 2009 01:08:34 +0000

Ahh, this is the starting problem. Sounds like a weak connection somewhere. To check and see, connect a volt meter to the starter terminals and watch the voltage while your trying to crank it. If there is less than 11 volts while cranking then there probably is a bad ground connection, but could be the positive side. Just be sure the ground to the frame is really good and clean and free of paint.